Major Retro-Fit Farmer Spec Trailing Shoe
The MAJOR farmer specification Trailing Shoe slurry applicator sits close to the rear of the tanker for better weight distribution and is designed to fit any size tanker. This unit is easily mounted onto the back door without welding or fabricating, and can be used with the existing splashplate in place. Slurry enters the macerator through the 4” Bauer coupling and is distributed through the 40mm outlets. The macerator is fitted with an integrated foreign body separator to prevent debris from blocking the outlets. It also contains self sharpening and self adjusting blades meaning reduced maintenance times. A large capacity stone trap is located under the macerator which collects debris. It can be cleaned out easily, without the use of tools.
The high tensile springs use the high carbon steel coulters to split the grass – allowing the slurry to run on the ground. The spring steel bars on the frame allow the outlets to follow the ground contours.
Major Contractor Spec Trailing Shoe
The MAJOR MJTS6430 Slurry Applicator covers an area of 6.4m with 30 outlets. Slurry enters the Vogelsang macerator through the 4” Bauer coupling and is distributed through the 40mm outlets. A large capacity sump is located under the macerator which collects debris. It can be cleaned out easily, without the use of tools. The 40mm distribution pipes are finished off with couplings to allow simple maintenance of the rubber nozzles. The high tensile springs use the high carbon steel coulters to split the grass allowing the slurry to run on the ground. Pneumatic wheels are fitted as standard letting the frame follow the ground contours.
The ExaCut Macerator is fitted with an integrated foreign body separator to prevent debris from blocking the outlets. It also contains self sharpening and self adjusting blades meaning reduced maintenance times.
Model | MJ81-750 | MJTS6430 |
Details | Retro-Fit Farmer Spec | Contractor Spec |
Working Width | 7.5m (24’ 7”) | 6.4m (20’ 11”) |
Transport Width | 2.4m (8’) | 2.7m (8’ 4”) |
Wing Pivot | 100° | 100° |
Height | 2.9m (9’ 6”) | |
No. of Outlets | 30 | 24 |
Weight | 690KG *including back door | |
Macerator | Vogelsang or Mastek | Vogelsang ExaCut |
Spools Required | 2 double acting hydraulic spools | |
Back Door | 30″ | n/a |
Rearfill | Yes | n/a |
Make sure all required fields and the captcha are filled in.